Installing the base cover
1
Align the base cover with the screw holders on the laptop .
2
Press the edges of the cover until it clicks into place.
3
Tighten the M2x5 screws to secure the base cover to the laptop.
4
Follow the procedure in
Battery
Removing the battery
NOTE:
A 4-cell 68Whr battery has only 1 screw.
1
Follow the procedure in
2
Remove the
base
cover.
3
To remove the battery:
a
Disconnect the battery cable from the connector on the system board [1].
b Loosen the M2x5 screw (1) that secure the battery to the laptop [2].
c
Lift the battery away from the laptop chassis [3].
14
Removing and installing components
After working inside your
computer.
Before working inside your
computer.