b
battery
c
WLAN card
d
WWAN
e
SSD card
or
hard drive
f
chassis frame
3
To release the SmartCard reader:
a
Disconnect the SmartCard reader board cable from the connector on the system board [1].
b Peel off the cable to release from the adhesive [2].
4
To remove the SmartCard reader:
a
Remove the M2.0x3.0 screws (2) that secure the SmartCard reader board to the palmrest [1].
b Pull the SmartCard reader board to release on the system board [2].
38
Removing and installing components