b Disconnect the power connector port cable from the connector on the system board [2].
c
Remove the M2*3 screw to release the metal bracket that secures the power connector port [3].
d Lift the metal bracket [4].
e
Lift the power connector port away from the computer [5].
Installing power connector port
1
Align the power connector port along the grooves on the slot and push it down.
2
Place the metal bracket on the power connector port.
3
Tighten the M2*3 screw to secure the power connector port to the computer
4
Connect the power connector port cable to the connector on the system board.
5
Tighten the M2*3 screw to secure the display cable to the computer.
6
Install the:
a
battery
b
base cover
7
Follow the procedure in
Chassis frame
Removing chassis frame
1
Follow the procedure in
2
Remove the:
26
Removing and installing components
After working inside your
computer.
Before working inside your
computer.