Installing the power connector port
1
Insert the power connector port into the slot on the computer.
2
Place the metal bracket on the power connector port.
3
Tighten the M2.0x3.0 screw to secure the metal bracket to the power connector port on the computer.
4
Connect the power connector port cable to the connector on the system board.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
Chassis frame
Removing the chassis frame
1
Follow the procedure in
2
Remove the:
a
SIM card module
b
base cover
c
battery
d
WLAN card
e
WWAN card
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
25