Set-Up As An Upright Device (Tower) - AEG Protect B. 750 PRO Operating Instructions Manual

4.3.2

Set-up as an upright device (tower)

Step 1:
Press the round
button located at the
bottom right. The
display is released
from the retainer.
Step 4:
Assemble the feet
as shown below.
... Set-up of the UPS in connection with an external battery unit
Finally, carefully lift the name plates at the side at the end of the
lettering, turn them and engage them in the pre-drilled second position.
Step 2:
Rotate the display
clockwise by 90°.
Step 5:
Position UPS into
the feet, which have
already been installed.
24
Step 3:
Press the display
back into its retainer
in the position
shown below.
Step 6:
Position the feet in
the front and rear
third.
EN