Battery Replacement - AEG Protect B. 750 PRO Operating Instructions Manual

stopped up, clean them. In case of unusually loud or turbulent
running, please contact our hotline (see Page 5).

10.3 Battery replacement

Remove any rings, watches or other metallic objects that you
may be wearing.
If the spare battery kit is damaged in any way or shows signs
of leakage, contact your specialist dealer immediately.
Recycle or dispose of the used battery in an appropriate
manner. Under no circumstances may the batteries be
disposed of in an open fire. The batteries could explode.
i
The procedure for replacing the kit can be seen in the following
example using a Protect B. PRO with an internal battery system:
1. Grasp the left and right sides below the front panel and pull
the front panel out toward the front. The lock disengages...
2. ...and you can swivel the entire front section upward. Do not
disconnect the ribbon cable to the liquid crystal display!
The mechanical parts must be handled without the use of great
force.
3. Now disconnect the internal battery system by detaching the
two battery connectors from one another.
ATTENTION:
A battery can cause an electric shock and can
therefore be considerably dangerous if handled
improperly.
The following precautionary measures should be
implemented before the batteries are replaced.
Note:
Be aware of the weight of the integrated battery
systems. Have another person assist you if
necessary.
The battery system is located directly behind the
front panel. For easier handling, the battery systems
are delivered completely pre-configured.
48
EN