Table of Contents
Advertisement
EATON Powerware
®
Energy Management System (EMS) Upgrade Kit User's Guide
5.
Verify that meter and status information from the EMS−UGK
displays on the page, similar to the example shown in Figure 15.
NOTE Because the system is not yet configured, active alarms may appear in the Active
Alarms window upon connection and may be ignored.
If your system is dual input but only one input displays on the
System Status page, click the Feature Settings tab and select the
Enable Dual Input Mode check box. Return to the System Status page
to verify that both inputs display (as shown in Figure 15), then
continue to Step 6.
Figure 15. System Status Page (Connected)
S
164201724 Rev 1 www.powerware.com
INSTALLATION
Active
Alarms
Window
27
Advertisement
Table of Contents
