E. Installing the Optional Heat-Zone
Kit
• Locate the Heat-Zone
®
of the appliance. See Figure 5.5. Remove one of the
knockouts from the appliance with a tin snips.
• Center the duct collar around the exposed hole and
attach it to the appliance with 3 screws. Note: Do this
BEFORE final positioning of the appliance.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone
remaining installation steps.
Note: Only one Heat-Zone
appliance.
HEAT ZONE
LOCATION
®
LEFT AND RIGHT SIDES
Figure 5.5 Heat Zone Cover Plate
32
Heatilator • HEIR36-IFT, HEIR42-IFT, HEIR50-IFT Installation Manual • 2458-980 Rev. B • 8/17
®
ports on the left and right sides
Gas Kit instructions for the
®
Gas Kit may be used with this
®
Gas