Installing The Optional Heat-Zone Gas Kit - Heatilator CRAVE4836 Installation Manual

E. Installing the Optional Heat-Zone
Kit
• Locate the Heat-Zone
®
the appliance. See Figure 5.5. Remove the knockouts
from the appliance with a tin snips.
• Place the Heat-Zone
®
the fi nal positioning of the fi replace as shown in Figure
5.5. Secure using eight self-tapping screws. Ensure the
Heat-Zone knockouts are completely covered by the
®
adapter box.
• Center the duct collar around the exposed hole and
attach it to the appliance with 3 screws.
Note: The adapter box will protrude out further than the
one inch standoffs on the appliance.
• Determine the location for the air register/fan housing
assembly.
Reference the Heat-Zone
remaining installation steps.
HEAT ZONE ® LOCATION
LEFT AND RIGHT SIDES
HEAT ZONE ADAPTER BOX
®
Figure 5.5 Heat Zone Adapter
Heatilator • CRAVE4836/ST, CRAVE6048/ST, CRAVE7260/ST, CRAVE8472/ST Installation Manual • 2301-970 Rev. Q • 9/15
32
®
ports on the left and right sides of
adapter box into position prior to
Kit instructions for the
®
Gas