Fluke 6109A Operator's Manual page 68

6109A/7109A
Operators Manual
SYSTem:PASSword:NEW <password>
SYSTem:PASSword:PROTection <boolean>
SYSTem:PASSword:PROTection?
SYSTem:TIME <hour>,<minute>,<second>
SYSTem:TIME?
SYSTem:VERSion
UNIT:TEMPerature <unit>
UNIT:TEMPerature?
64
1.800.561.8187
Set the password.
<password> is a four-digit number.
This command is password protected.
Set the password protection level.
<boolean> is 0 (OFF) or 1 (ON). When this setting is on, conditionally password
protected commands are protected. When the setting is off, only calibration
commands and password commands are protected.
This command is password protected.
Set the clock time.
This command is conditionally password protected.
Return the SCPI version.
The response is "1999.0".
Select the temperature unit.
<unit> is C or CEL for degrees Celsius or F or FAR for degrees Fahrenheit.
Fahrenheit may not be available in some regions of the world.
www.
information@itm.com
.com