Advertisement
Safety Instructions
Read all safety warnings and instructions provided with
the drill stand and the drill. Failure to follow the warnings
and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
ƒ
Pull the plug from the socket outlet before carrying out
adjustments on the power tool or replacing accessory parts.
Unintentional starting of drills is the cause of some accidents.
ƒ
Assemble the drill stand properly before mounting the drill.
The correct assembly is important in order to ensure proper function.
ƒ
Before using, fasten the drill securely to the drill stand.
An unsecured drill in the drill stand can lead to loss of control.
ƒ
Fasten the drill stand onto firm and plane surface.
If the drill stand can slip away or wobble, then the drill can not be
guided evenly and securely.
ƒ
When drilling overhead or on surfaces that are not horizontal,
secure the drill stand with a safety chain.
In case of a power failure or excessive load, the holding force of the
magnet is not maintained. The drill stand can fall down and cause
accidents.
ƒ
Connect the drill stand to a properly earthed mains supply.
The socket outlet and the extension cable must be equipped with an
operative protective conductor.
ƒ
Keep the connection cable of the drill away from the working area.
Damaged or entangled cables increase the risk of an electric shock.
ƒ
Maintain the drill stand with care. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the function of the drill stand. Have
damaged parts repaired before using the drill stand. Many
accidents are caused by poorly maintained devices.
ƒ
Have your drill stand serviced/repaired only by a qualified repair
person using original replacement parts. This will ensure that the
safety of the device is maintained.
ƒ
The safety warnings and working instructions for the drill as well
as for the drilling tools and accessories being used are to be
strictly observed!
ƒ
During use, the user and other persons standing nearby have to wear
suitable ear protectors, goggles, helmets, protective gloves and boots.
14
Advertisement
