7. Set the console assembly (H) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the two indicated screws
(I). Then, remove the Console Crossbar (61).
8. Remove and discard the four indicated
screws (J).
9. Attach the Console Crossbar (61) to the Left
and Right Uprights (66, 76) with four #10 x 3/4"
Screws (8) and four #10 Star Washers (23);
start all four Screws, and then tighten them.
Then, firmly tighten the two 5/16" x 3/4" Screws
(5) and the two 5/16" x 3" Screws (7).
7
I
61
8
J
9
8
23
7
5
66
10
H
I
J
61
8
23
7
76
5