GE G60 Instruction Manual page 636
Generator protection system
Hide thumbs
Also See for G60:
- Instruction manual (780 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (696 pages)
Table of Contents
Advertisement
PRODUCT INFORMATION
The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed. The date format reflects the format specified for the clock and can vary from that shown here.
6
6-34
BOOT DATE:
2016/09/15 16:41:32
GFP PROGRAM
REVISION: 7.60
GFP COMPILE DATE:
2017/03/03 12:58:00
GFP BOOT PROGRAM
REVISION: 1.00
GFP BOOT COMP. DATE:
2017/03/03 12:58:00
FPGA PROGRAM
REVISION: 02.02
FPGA DATE:
2016/09/15 16:41:32
CHAPTER 6: ACTUAL VALUES
Range: YYYY/MM/DD HH:MM:SS
Date and time when the boot program was built.
Range: 0.00 to 655.35
Revision number of front panel program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date/time when graphical front panel firmware built.
Range: 0.00 to 655.35
Revision number of panel boot program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date/time when panel boot program was built.
Range: 0.00 to 655.35
Revision number for FPGA.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the FPGA was built.
G60 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Advertisement
Table of Contents
