Specifications; Chassis Physical Design - Dell S4248FB-ON Installation Manual

This section lists the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F—45°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see
Topics:
•

Chassis physical design

• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certification of compliance
• Electromagnetic compatibility
• Safety standards and compliance agency certifications
• Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Restricted Material Compliance.

Specifications

Specifications
1.72 inches (44 mm)
17.1 inches (434 mm)
18.2 inches (462 mm)
PSU/fan tray handle: 1.57 inches (40 mm)
22 lbs (2* PSUs)
9.98 kg (2* PSUs)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
9
Specifications 41