Prerequisites; S4200-On Configurations; Luggage Tag - Dell S4248FB-ON Installation Manual

LED
Link/Activity LED—2x50G

Prerequisites

The following is a list of required and optional components for the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch:
NOTE: Detailed installation instructions for the S42400-ON Series are provided in
Series.
• S4200-ON Series (S4248FB-ON or S4248FBL-ON) switch or multiple switches, if stacking
• AC country- and regional-specific cables to connect the AC power source to each of the switches' AC power supplies
• Mounting brackets for rack installation, included
• Screws for rack installation
• #1 and #2 Phillips screw drivers, not included
• Torx screwdriver, not included
• Ground cable screws, included
• Copper or fiber cables
Other optional components are:
• Ground cable and lug for the frame-end of the ground cable
• Extra power supply unit
• Extra fan module
• Extra mounting brackets if installing in a four-post rack or cabinet

S4200-ON configurations

You can order the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch in several different configurations.
• S4248FB–ON or S4248FBL-ON AC normal airflow: Forty 1/10GbE SFP+ ports, two 40GbE or 4x1/10GbE QSFP+, and six 100/40GbE
or 4x25/10GbE or 2x50GbE QSFP28 ports, two AC power supplies, and five fan subsystems with airflow from the I/O side to the
power supply side
• S4248FB–ON or S4248FBL-ON AC reverse airflow: Forty 1/10GbE SFP+ ports, two 40GbE or 4x1/10GbE QSFP+, and six 100/40GbE
or 4x25/10GbE or 2x50GbE QSFP28 ports, two AC power supplies, and five fan subsystems with airflow from the power supply side to
the I/O side
• Fan with airflow from the I/O side to the PSU side
• Fan with airflow from the PSU side to the I/O side
• AC Power supply with airflow from the I/O side to the PSU side—normal
• AC Power supply with airflow from the PSU side to the I/O side—reverse
• DC Power supply with airflow from the I/O side to the PSU side—normal
• DC Power supply with airflow from the PSU side to the I/O side—reverse

Luggage tag

The S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch has a pull-out tag, known as a luggage tag, on the I/O-side of the switch.
The front of the luggage tag includes switch ID information. The back of the luggage tag includes a QRL that takes you to a Dell EMC
How-To site where you can watch videos about racking the switch, replacing components, configuring port channels, and so on.
Description
• Flashing yellow, 1 second on/off—Port beacon
• Of —No Link
• Flashing yellow—Port activity at 2x50G on a QSFP28 port
• Flashing yellow, 1 second on/off—Port beacon
Site Preparations and Install the S4200-ON
S4200-ON series switch 11