Advertisement
PHASE 2 – INSTALLATION
2.2 MOUNTING TRACKS INSTALLATION
Ranger Design Tracks
2.2.1 • Remove the plugs on the roof holes, then apply a bead of silicone around each hole.
• Put flat washers and neoprene spacers on the bottom bolts, then cut the plug extrusion
into 8 pieces of 6" and attach one piece on both ends of the mounting tracks.
• Align the bottom bolts to the roof holes, then install the mounting tracks onto the roof.
Regular
Extended
For technical support, contact us at 1-800-565-5321
14×
#90-495 Carriage Bolt 5/16" × 1-1/4"
#98-109 Flat Washer
#98-149 Neoprene Spacer
#94-116 Serrated Nut
16×
#90-495 Carriage Bolt 5/16" × 1-1/4"
#98-109 Flat Washer
#98-149 Neoprene Spacer
#94-116 Serrated Nut
1520-DH Installation Guide | REV. D1 | Page 16
TOOLS
q Cordless Impact
q 1/2" Socket
q Knife
TOOLS
q Cordless Impact
q 1/2" Socket
q Knife
Advertisement
