Table of Contents
Advertisement
PHASE 2 – INSTALLATION
2.1 MOUNTING TRACKS INSTALLATION
2.1.1 • Remove existing plugs on the vehicle roof holes.
• Use a tap ( M8 - 1.25 ) to remove the excess dirt/paint in the holes of the van.
• Apply a bead of silicone around each hole, then fasten the tracks to the roof.
TIPS: It's easier to put the bolts, lock washers, flat washers and spacers on the tracks, first,
then install the tracks to the roof.
Mounting Track Orientation
REAR
use
For technical support, contact us at 1-800-565-5321
use
use
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
8×
#90-970 Hex Bolt M8 × 35
#98-123 Lock Washer
#98-117 Flat Washer
#98-149 Neoprene Spacer
#98-136 Spacer
#98-149 Neoprene Spacer
1505-FTL Installation Guide | REV. B1 | Page 7
FRONT
use
Advertisement
Table of Contents
