2.2.1 Attach the floor bracket to the van using the 2 D-rings. TOOLS q Cordless Impact q T50 Torque Bit HARDWARE USED 2× Use the D-ring Bolts 3320-TC Installation Guide | REV. C2 | Page 7 For technical support, contact us at 1-800-565-5321...
NOTE: Do not tighten the bolt too much to prevent breakage. TOOLS q Cordless Drill q 10mm Socket HARDWARE USED 10× #90-971 Hex Bolt M6-1.0 × 20mm 3320-TC Installation Guide | REV. C2 | Page 8 For technical support, contact us at 1-800-565-5321...
#94-116 Serrated Nut 2.2.4 Put the warning label on the indicated location. NOTE: The english warning label is already attached to the upper panel. WARNING LABEL 3320-TC Installation Guide | REV. C2 | Page 9 For technical support, contact us at 1-800-565-5321...
Page 10
“Congratulations, you have successfully installed your Contoured Partition! Thank you for doing business with us.” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: 3320-TC Installation Guide | REV. C2 | Page 10 For technical support, contact us at 1-800-565-5321...