Advertisement
PHASE 2 – INSTALLATION
2.1 MOUNTING TRACKS INSTALLATION
2.1.1 Pull the plugs off, and apply a bead of silicone around each hole, then install the mounting
tracks on the roof with rubber strips underneath.
NOTE: The ends of the mounting tracks with the half-circles go to the front of the vehicle.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q T27 Torque Bit
HARDWARE USED
12×
#90-991 Hex Bolt
#98-113 Lock Washer
#98-119 Flat Washer
1525-MM Installation Guide | REV. B1 | Page 15
FRONT
M6 × 20
Advertisement
