Ranger 1520-DH Installation Manual page 11

1.2.8 Loosen the pre-assembled hardware on the ladder clamp hasp, slide the hasp on the ski to the
position shown below, and tighten the nuts.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 1/2" Socket
q Tape Measure
q Marker
HARDWARE USED
2×
-
hardware is pre assembled
#90-487 Carriage Bolt 5/16" × 3/4"
#98-117 Flat Washer
#98-123 Lock Washer
#94-105 Hex Nut
1520-DH Installation Guide | REV. D1 | Page 11
.