PHASE 1 – ASSEMBLY
1.2 LADDER RACK ASSEMBLY
1.2.1 Peel the backer off of the adhesive on the hook protector, then attach the hook protector
to the upper rear hook.
1.2.2 Attach the rear hook to the ladder clamp, with the pre-assembled hardware on the pivot bar.
For technical support, contact us at 1-800-565-5321
TOOLS
q Knife
REMOVE
TOOLS
q Cordless Impact
q 1/2" Socket
q 1/2" Wrench
HARDWARE USED
2×
hardware is pre
1520-DH Installation Guide | REV. D1 | Page 6
-
.
assembled
#90-225 Hex Bolt
5/16" - 18 × 2" SS304
#98-117 Flat Washer
#98-117 Flat Washer
#94-111 Lock Nut