2.1.2 Mounting tracks preparation for extended distance.
Ranger Design Tracks
2×
Slide bolts on top and bottom side of the mounting tracks, then attach the end caps on
both ends of the mounting tracks.
Rear
HARDWARE USED
2×
top
#90-487 Carriage Bolt
5/16" × 3/4" SS304
4×
bottom
#90-495 Hex Bolt
5/16" × 1 - 1/4" SS304
For technical support, contact us at 1-800-565-5321
Extended
HARDWARE USED
2×
4×
top
#90-487 Carriage Bolt
5/16" × 3/4" SS304
bottom
#90-495 Hex Bolt
5/16" × 1 - 1/4" SS304
1520-DH Installation Guide | REV. D1 | Page 15
Front