Phase 2 - Installation; Q 2.1 Mounting Tracks Preparation - Ranger 1520-DH Installation Manual

PHASE 2 – INSTALLATION
2.1 MOUNTING TRACKS PREPARATION
2.1.1 Mounting tracks preparation for regular distance.
Ranger Design Tracks
2×
Slide bolts on top and bottom side of the mounting tracks, then attach the end caps on
both ends of the mounting tracks.
Rear
HARDWARE USED
2×
top
#90-491 Carriage Bolt
5/16" × 1" SS304
4×
bottom
#90-495 Hex Bolt
5/16" × 1 - 1/4" SS304
For technical support, contact us at 1-800-565-5321
Regular
HARDWARE USED
2×
top
#90-491 Carriage Bolt
5/16" × 1" SS304
3×
bottom
#90-495 Hex Bolt
5/16" × 1 - 1/4" SS304
1520-DH Installation Guide | REV. D1 | Page 14
Front