Advertisement
1.2.6 • Pull out the 14.5" track plug on the passenger side of the front crossbow.
• Loosen the pre-assembled hardware on the front hook and slide the hook onto the passenger
side of the front crossbow to the position shown below.
• Cut the track plug, then attach it back to the crossbow.
For technical support, contact us at 1-800-565-5321
Tighten the nuts just to hold the front
hook for adjustment.
TOOLS
q Marker
HARDWARE USED
2×
-
hardware is pre
assembled
#90-491 Carriage Bolt 5/16" × 1"
#98-117 Flat Washer
#98-123 Lock Washer
#94-105 Hex Nut
1520-DH Installation Guide | REV. D1 | Page 9
.
Advertisement
