Network | Port Forwarding - Gemtek Systems WLTFQR-121 User Manual

Network | Port Forwarding

Port Forwarding forwards the packet according to the routing table from WAN port to a
designated IP port. This Port Forwarding page enables managing and setup of the rules for
Port Forwarding. Click "Add+" button to add a new port forwarding rule.
Protocol: Set the protocol for port forwarding: TCP or UDP
WAN Port: Enter the range (begin and end ports) for the WAN
LAN IP: Enter the IP address that identifies the IP subnet of the remote network
Enabled: Select this check-box to enable/disable port forwarding for the specific IP
Delete: Select an IP to delete
Add button
Cancel button
Apply button
LTE Indoor CPE | User Manual
Network > Port Forwarding
Click the "Add+" button to add a new rule setting.
Reset fields to the last saved values.
Commit the changes made and save to the CPE device, some
services will be reloaded.
P. 27