Page 2
Getting to Know your Device 1. SIM card Slot Cover: Open the cover and insert SIM card into the slot with right direction. 2. Telephone Port (RJ-11): Connect your telephone to Dual-Band Modem with a RJ-11 telephone cable. 3. LAN Port (RJ-45): Port for connecting PC, hub and switch or other network equipment by RJ-45 Ethernet cable.
Page 3
Installation Please follow the steps below to install the device: Step1: Insert SIM card into the device with right direction. Step2: Insert the power cord into the DC-12V power jack; and insert the plug into power outlet. Step3: Power ON the device using the switch button. The device will start the booting process. After a few seconds, the LED lights will start blinking.
Page 4
Easy Setup Please follow the steps below to configure your device through the web interface: Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the http://192.168.1.1 Dual-Band Modem : Step2: Enter Dual-Band Modem administrator login username/password to access the web management interface.
Page 5
Troubleshooting Tips If you are experiencing any issues with your device: Restart your device. Restore your device to its factory default settings. Contact Telefonica Network or visit the website http://www.telefonica.com.ar/...
Page 6
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the WLTFQT141GN and is the answer not in the manual?
Questions and answers