Firewall; Firewall | Basic - Gemtek Systems WLTFQR-121 User Manual

Firewall

The Firewall page enables to configure the firewall feature. The firewall feature can be used
to block unauthorized access while allowing only authorized communications from the
Internet network. This feature also allows the device to be managed over the Internet by
authorized personnel.

Firewall | Basic

Lan Interface Status: Click "Enable" button to enable two physical Ethernet (RJ-45)
ports, and vice versa, "Disable" button would make two physical Ethernet ports
invalid. No matter LAN interface is enabled or disabled, users could use WiFi connection
to log in to GUI.
Enable Firewall: Tick the checkbox to enable firewall which means set the default
access policy to "deny".
Allow ping from WAN: Tick the checkbox to enables the unit to respond to ping
LTE Indoor CPE | User Manual
Firewall > Basic
P. 36