Network | Dhcp Server - Gemtek Systems WLTFQR-121 User Manual

Network | DHCP Server

This device has a built-in DHCP server that can be used for managing the distribution of IP
addresses for the devices connected to the local Ethernet ports and WiFi access point. In the
DHCP Server page you could set DHCP parameters for dynamic IP assignment.
Enable DHCP Server: Tick the checkbox dynamically assign a leased IP address to
clients that connect to the device from the local network.
DHCP Starting IP Address: Enter the first IP address assigned by the DHCP server.
DHCP Ending IP Address: Enter the last IP address assigned by the DHCP server.
Primary/Secondary/Tertiary DNS: You can specify three DNS server and select
how the DNS Server is assigned. Tick the checkbox "From ISP" to gain the DNS
server from ISP; the below three DNS fields will be disabled. If un-tick the checkbox,
enter the DNS server IP by yourself.
DHCP Lease Time: Set the lifetime for your DHCP IP. (Range: 2minutes~365days)
Lease Reservation Table: This table displays information on reserved IP addresses
for leasing. In this section you can assign the specific IP addresses to the specific client
LTE Indoor CPE | User Manual
Network > DHCP Server
P. 24