Mobile Network | Default Pdn - Gemtek Systems WLTFQR-121 User Manual

Mobile Network | Default PDN

Packet Data Network (PDN) Gateway is responsible for acting as an anchor of mobility
between 3GPP and non-3GPP technologies. It provides connectivity from the device to
external packet data networks by being the point of exit and entry of traffic for the device.
APN for network attach: Select "Auto" to let CPE to automatically capture APN from
your service provider or "Manual" to manually type APN name in "APN" field.
Authentication Type: Select authentication type for APN from drop-down list;
"None", "PAP (Password authentication protocol)", or "CHAP (Challenge
Handshake Authentication Protocol)". Enter the corresponding username and
password in below fields if PAP or CHAP is selected.
PDN Type: Only "IPv4" available at this moment.
Cancel button
Apply button
LTE Indoor CPE | User Manual
Status > Default PDN
Reset fields to the last saved values.
Commit the changes made and save to the device, new
P. 20