Network | Port Trigger - Gemtek Systems WLTFQR-121 User Manual

Network | Port Trigger

The tab allows you to configure Port Trigger rules; click the "Add+" button to add a new
Port Trigger rule.
Application Name: Name of the Port Trigger rule.
Triggered Range: Which port range the outgoing packet will trigger the rule? Enter
the starting and ending port range.
Forwarded Range: Which port range the incoming packet will trigger the rule?
Enter the starting and ending port range.
Enable: Tick the checkbox to active the rule.
Delete: Select a rule to delete.
Add button
Cancel button
Apply button
LTE Indoor CPE | User Manual
Network > Port Trigger
Click the "Add+" button to add a new rule setting.
Reset fields to the last saved values.
Commit the changes made and save to the CPE device, some
P. 28