Gemtek Systems WLTFQR-121 User Manual page 35

Enable WPS: When "Open Systems" authentication is selected; a WPS(Wi-Fi

Protected Setup) function is available. Tick the checkbox to enable WPS, click
"Add WiFi Client by WPS" button on GUI to add another client to be connected
to the CPE.
Access Control List: This option could allow you to control the access to wireless
network from specific MAC address. Select "Disable" to disable this function, or select
"Allow" / "Deny" to add a new rule for access permission/restraint. Click "Insert",
and then enter the MAC address no matter you would like to allow or prevent the
specific wireless connection.
Cancel button
Apply button
LTE Indoor CPE | User Manual
TKIP/AES RADIUS Server
RADIUS Port
RADIUS Key
Reset fields to the last saved values.
Commit the changes made and save to the CPE device, some
services will be reloaded.
P. 35