Network | Network Mode - Gemtek Systems WLTFQR-121 User Manual

Network | Network Mode

Operation Mode: Only NAT Mode is available at this moment.
Connection Mode: There are two connection mode provided from the CPE, "DHCP" or
"Static".
If "DHCP" mode is selected, CPE would automatically acquire configuration

information from a DHCP server and uses it to configure its host; enter the host
name in "Host Name" field. If successfully get the IP information from DHCP server,
they will be shown on each field with grey font.
Static IP addresses are manually assigned to a device by an administrator; if

"Static" mode is selected, manually enter required information in below fields.
Cancel button
Apply button
LTE Indoor CPE | User Manual
Network > Network Mode
Reset fields to the last saved values.
Commit the changes made and save to the CPE device, some
services will be reloaded.
P. 23