About this Guide
This document provides information and procedures on installation and configuration of
Gemtek LTE Indoor CPE. You could utilize the theoretical information in this guide to setup
your device.
Prerequisite Skills and Knowledge
To use this document effectively, you should have a working knowledge of Local Area
Networking (LAN) concepts and wireless Internet access infrastructures. In addition, you
should be familiar with the following:
Hardware installers should have a working knowledge of basic electronics and
mechanical assembly, and should understand related local building codes.
Network administrators should have a solid understanding of software installation
procedures for network operating system and troubleshooting knowledge. LTE Indoor
CPE has a web GUI which supports http/https protocol; it could be used to configure the
CPE settings through web browser by your PC. Please refer to following pages for more
detail.
Conventions Used in this Document
The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in
damage.
Important information that should be observed.
Additional information that may be helpful but which is not required.
bold
Menu commands, buttons and input fields are displayed in bold
LTE Indoor CPE | User Manual
P. 4