Table of Contents
Advertisement
To enable access control in the router, perform the following steps:
1. Click to select Enable MAC Access Control.
2. Select the appropriate Operating Type. Grant allows client computers access to the
router. Deny restricts the access.
3. Enter the MAC address of the network card on the computer on which you wish to
apply the above control policy.
4. Click Add to enter the rule to the router.
5. To remove an existing rule, click to select Del under MAC address and click the Del
button.
6. Click the Submit button to store the changes.
Back to Top
Port Forwarding Settings
Port Forwarding Settings
Advertisement
Table of Contents
