Table of Contents
Advertisement
Changing the Sound Z
If the DVD is recorded with multilingual tracks, you can
select the language you want while playing the DVD.
If the DVD is recorded in multiple audio formats (PCM,
Dolby Digital, DTS or MPEG), you can select the audio
format you want while playing the DVD.
With multiplex CDs or VIDEO CDs, you can select the
sound from the right or left channel and listen to the
sound of the selected channel through both the right and
left speakers. In this case, the sound loses its stereo effect.
For example, with a disc containing a song, the right
channel may output the vocals and the left channel may
output the instrumental. If you only want to hear the
instrumental, you can select the left channel and hear it
from both speakers.
Select "AUDIO" after pressing DISPLAY.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
AUDIO
1: ENGLISH
1: ENGLISH
2: FRENCH
3: SPANISH
To select, press
xAUDIO
When playing a DVD
Select the language. The languages you can select are
different depending on the DVD. When 4 digits are
displayed, they represent the language code. Select the
language code from the list on page 67.
When the same language is displayed two or more times,
the DVD is recorded in multiple audio formats. The
current audio format is shown on the "PROGRAM
FORMAT" display.
When playing a VIDEO CD or a CD
The default setting is underlined.
• STEREO : The standard stereo sound
• 1/L : The sound of the left channel (monaural)
• 2/R : The sound of the right channel (monaural)
z
You can select "AUDIO" directly
Press AUDIO on the remote. Each time you press the button, the
item changes.
Notes
• Depending on the DVD, you may not be able to change the
languages even if multilingual sounds are recorded on the
DVD.
36
DVD
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
C
R
LFE
LS
RS
, then
.
ENTER
• While playing the CD/VIDEO CD, the standard stereo playback
will be resumed when:
– you eject the disc
– you turn the power off
• While playing the DVD, the sound may be changed when:
– you eject the disc
– you change the title
• If the language is displayed as a 4-digit number, refer to the
language code list on page 67.
• If "DTS" is set to "OFF" in "AUDIO SETUP," the DTS track
selection option will not appear on the screen even if the disc
contains DTS tracks.
Displaying the audio information of the
disc
When you select "AUDIO," the playing channels are
displayed on the screen.
In Dolby Digital format, multiple signals ranging from
monaural to 5.1 channel signals can be recorded on a
DVD. Depending on the DVD the number of the recorded
channels may be different.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
To select, press
, then
* "PCM," "DTS," "DOLBY DIGITAL" or "MPEG" is
displayed. In case of "DOLBY DIGITAL," the channels
in the playing track are displayed by number as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2
+ Center component 1
** The letters in the program format display mean the
following:
L:
Front (left)
R:
Front (right)
C:
Center (monaural)
LS: Rear (left)
RS: Rear (right)
S:
Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
DVD
Current
audio
format*
C
R
Current
playing
LFE
program
RS
format**
.
ENTER
LFE (Low
Frequency Effect)
component 1
Advertisement
Table of Contents
