Table of Contents
Advertisement
Sound
There is no sound.
, Check that the player is connected securely.
, The audio connecting cord is damaged. Replace it
with a new one.
, Make sure you connect the player to the audio
input connectors on the receiver (amplifier) (page
16).
, Make sure you turn on the TV and the receiver
(amplifier).
, Make sure you select the appropriate input on the
receiver (amplifier) so that you can listen to the
sound from the player.
, The player is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
, The player is in fast forward or fast reverse mode.
Press H to return to normal play mode.
, Check the speaker connections and setting (pages
16, 18, 19, 57). Refer to the operating manual of
your receiver (amplifier).
, When you play the Dolby Digital/MPEG audio
sound tracks and attempt to output from the
OPTICAL and COAXIAL connectors, set
"DIGITAL OUT" to "ON" in the setup display.
Otherwise no sound will come out from the
OPTICAL and COAXIAL connectors (page 55).
, When you play the DTS sound tracks, no sound
will come out from the LINE OUT (AUDIO) and
PHONES connectors (page 56).
Sound noise is heard.
, Clean the disc.
, There is a flaw on the disc.
, When you play a CD with DTS sound tracks, noise
will come from the LINE OUT (AUDIO) and
PHONES connectors (page 56).
Sound distortion occurs.
, In the setup display, set "AUDIO ATT" in "AUDIO
SETUP" to "ON" (page 54).
The sound loses stereo effect when you play a
VIDEO CD or a CD.
, Set "AUDIO" to "STEREO" in the Control Menu
display (page 36).
, Make sure you connect the player correctly (pages
14, 16, 18, 19).
The surround effect is difficult to hear when you
are playing a Dolby Digital sound track.
, Check the speaker connections and setting (pages
19, 57). Refer to the operating manual of your
receiver (amplifier).
, Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital format.
The sound comes from the center speaker only.
, Depending on the disc, the sound may come from
the center speaker only.
The sound comes from the front speaker only.
, You set "VES" to "VES A" or "VES B" in the
Control Menu display when you have connected
the rear speakers (page 39). Select the other item.
Operation
The remote does not function.
, Remove any obstacles between the remote and the
player.
, Use the remote near the player.
, Point the remote at the remote sensor
player.
, Replace all the batteries in the remote with new
ones if they are weak.
The disc does not play.
, There is no disc inside ("Insert disc." appears on
the TV screen).
Insert a disc.
, "ERROR" appears on the front panel display if a
disc was placed upside down.
Insert the disc with playing side facing down.
, Insert the disc correctly with the playback side
facing down.
, Clean the disc.
, There is a flaw on the disc.
, "ERROR" appears on the front panel display if a
disc such as CD-ROMs (page 9) which the player
cannot play was inserted.
Insert a DVD, a VIDEO CD, or a CD.
, Check the region code of the DVD (page 8).
, Moisture has condensed inside the player. Remove
the disc and leave the player turned on for about
half an hour (page 10).
on the
61
Advertisement
Table of Contents
