Specifications - Sony DVP-F11X Operating Instructions Manual

Table of Contents

Advertisement

Specifications

CD/DVD player
Laser
Semiconductor laser
Signal format system
NTSC/(PAL), EIAJ standard
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)*
CD: 2 Hz to 20 kHz (±0.5 dB)*
Signal-to-noise ratio
115 dB* (LINE OUT (AUDIO) connectors
only)
Harmonic distortion
0.002 %*
Dynamic range
DVD: 100 dB*
CD: 97 dB*
Wow and flutter
Less than detected value*
(±0.001 % W PEAK)
Outputs and inputs
Jack
Output
type
level
Phono
2 Vrms
LINE OUT
jacks
(at 50 kilohms)
(AUDIO)
OPTICAL
Optical
–18 dBm
output
connector
Phono
0.5 Vp-p
COAXIAL
jack
Phono
1.0 Vp-p
LINE OUT
(VIDEO)
jacks
4-pin
Y: 1.0 Vp-p
LINE OUT
mini DIN
(S-VIDEO)
C: 0.286 Vp-p
(NTSC)
C: 0.3 Vp-p
(PAL)
LINE OUT
Phono
2 Vrms
jack
(at 50 kilohms)
(WOOFER OUT)
Phone
12 mW
PHONES
jack
64
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
AC power adaptor
Power requirements
Output voltage
Dimensions (approx.)
Mass (approx.)
Operating temperature
Storage temperature
Load impedance
Over 10 kilohms
Supplied accessories
Wave length: 660 nm
See page 12.
* Measured by EIAJ (Electronic Industries Association of Japan)
75 ohms terminated
standard.
The signals from LINE OUT (AUDIO) connectors are measured.
When you play the PCM sound tracks with 96 kHz sampling
75 ohms,
frequency, the output signals from the OPTICAL and COAXIAL
sync negative
connectors are converted to 48 kHz (sampling frequency).
75 ohms,
sync negative
Design and specifications are subject to change without notice.
75 ohms terminated
Over 10 kilohms
32 ohms
DC 10.5 V
13 W
215 × 60 × 314 mm (w/h/d)
incl. projecting parts
2.1 kg
5 ˚C to 35 ˚C
25 % to 80 %
100 – 110 V AC, 50/60 Hz
DC 10.5 V, 1.3 A in operating mode
125 × 39 × 62 mm (w/h/d)
excl. projecting parts
235 g
5 ˚C to 35 ˚C
–20 ˚C to +60 ˚C

Advertisement

Table of Contents
loading

Table of Contents