Insignia NS-HWMG1663 User Manual page 8

Step 3 Installing the interior dividers and sides
:
1 Install eight rubber shelf supports (M11) on the preinstalled shelf brackets of the interior dividers.
2 Screw the dowels (M14) into the holes indicated in the side panels.
3 Insert the dowels (M14) into the pre-drilled holes in the stand, then attach the two side panels (M4) using eight
side support screws (M12).
4 Slide the two interior dividers (M2) vertically into the grooves in the front and back of the TV stand body, as
shown, until they touch the bottom.
M14
You'll need:
8
M2
M11
M11
M12
M11 (8)
M12 (8)
www.insigniaproducts.com
Metal, Glass, and Wood Finish TV Stand
M11
M11
M14 (4)