Injecting Bursts Of Steam; Automatic Burst Of Steam; 1, 2 Or 3 Bursts Of Steam - Miele H6880BP2 Operating And Installation Instructions

Moisture Plus 

Injecting bursts of steam

Steam can cause scalding.
Do not open the door during bursts
of steam. Also, condensation on the
sensors will cause then to have a
slow reaction time.

Automatic burst of steam

Automatic burst of steam
display.
Once the preheating phase has been
completed, the automatic burst of
steam is injected.
The water will vaporize in the oven while
steam is being released and
steam active will appear in the display.
After the burst of steam
will appear in the display.
completed
 Continue cooking until the end of the
cooking duration.
72
appears in the
Burst of
Burst of steam,

1, 2 or 3 Bursts of steam

Manual bursts of steam
When Manual has been selected, you
can trigger bursts of steam once
Manual burst of steam
Please wait until the preheating phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: Set the "Timer" as a reminder.
 Select
Start Manual burst of steam
The burst of steam will be released and
Burst of steam active
display.
 Proceed as described to inject further
bursts of steam.
Burst of steam, completed
the display after each burst of steam.
 Continue cooking until the end of the
cooking duration.
Time-controlled steam
The oven will release the steam after
the specified amount of time.
Start
appears.
.
will appear in the
will appear in