Battery Replacement - Matco Tools MD95 Operating Instructions Manual

Scan Tool Controls

BATTERY REPLACEMENT

14. Bluetooth icon – Indicates communication status with a compatible
Innova mobile application. A solid blue icon indicates an active
Bluetooth connection has been established.
BATTERY REPLACEMENT
Replace batteries when the battery symbol
and/or the 3 LEDS are all lit and no other data is visible on screen.
1. Locate the battery cover on the back of the Scan Tool.
2. Slide the battery cover off (use your fingers).
3. Replace batteries with three AA-size batteries (for longer life, use
Alkaline-type batteries).
4. Reinstall the battery cover on the back of the Scan Tool.
Adjustments After Battery Installation
The first time the Scan Tool is turned on, you must select the desired
display language (English, French or Spanish) and unit of measurement
(Standard or metric) as follows:
1. Press POWER/LINK
The Select Language screen displays.
2. Select the desired display language, then the ENTER
The Select Unit screen displays.
3. Select the desired unit of measurement, then press ENTER
The Firmware Version screen displays.
After the initial language and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to "ADJUSTMENTS AND
SETTINGS" on page 45 for further instructions.
6
is visible on display
to turn the Scan Tool "ON."
.
.