Matco Tools MD95 Operating Instructions Manual page 29

If the Scan Tool fails to establish communication with the vehicle,
a "Communication Error" message displays.
- Ensure your vehicle is OBD2 compliant.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press POWER/LINK
3. Select Record Manually, then press ENTER
The Select PIDs to Record screen
displays.
4. Press UP
through the available PIDs. When a PID
you wish to record is highlighted, press
ENTER (a "checkmark" shows to
confirm your selection). Repeat until
only the PIDs you want to record have
all been selected.
To deselect a PID, highlight the PID, then press ENTER
The checkmark is removed.
To record all PIDs, select Record All PIDs, then press LD to
continue.
5. When you are finished making your selections, press LD to continue.
The Record Live Data screen displays.
Highlight Start Recording. Put the engine in the operating con-
dition where the problem manifests itself.
- If necessary, drive the vehicle until you reach the vehicle
speed at which the problem occurs.
6. When the problem occurs, press and
release LD.
A progress message shows on the
display.
When recording is complete, a
confirmation screen displays. Select
Yes or No, as desired, then press
ENTER
If recording was not successful, an advisory message displays.
Press ENTER
If Yes is selected, the Scan Tool enters "Playback" mode (see
LIVE DATA PLAYBACK on page 28 for details). If No is
selected, the display returns to the Live Data Menu.
If desired, you can transfer the recorded Live Data information
to a personal computer with the use of optional software (see
instructions included with the software for more information).
RECORDING (CAPTURING) LIVE DATA
and DOWN to scroll
.
to return to the Record Live Data menu.
Live Data Mode
to continue.
.
.
27