Matco Tools MD95 Operating Instructions Manual page 36

Additional Tests
VIEWING VEHICLE INFORMATION
1. With the Scan Tool in OBD2 mode, press M.
The Main Menu displays.
2. Select Vehicle Information, then press ENTER
The Vehicle Information menu displays.
3. Select Vehicle ID, then press ENTER
The first time the Vehicle ID function is used, it may take several
minutes to retrieve the information from the vehicle's computer.
4. When the retrieval process is completed,
the vehicle ID information displays.
5. When you have finished viewing the
retrieved vehicle ID information, press
ENTER
Information menu, or, press M to return
to the Main Menu.
Viewing Available Modules
The Scan Tool can retrieve a list of modules supported by the vehicle
under test.
1. With the Scan Tool in OBD2 mode, press M.
The Main Menu displays.
2. Select Vehicle Information, then press ENTER
The Vehicle Information menu displays.
3. Select Available Modules, then press ENTER
4. When the retrieval process is completed,
a complete list of modules supported by
the vehicle under test displays.
5. When you have finished viewing the list
of available modules, press ENTER
to return to the Vehicle Information menu,
or, press M to return to the Main Menu.
Viewing In-use Performance Tracking (IPT)
The Scan Tool can retrieve In-use Performance Tracking (IPT) statistics
for monitors supported by the vehicle under test. Two values are
returned for each monitor; the number of times that all conditions
necessary for a specific monitor to detect a malfunction have been
encountered (XXXCOND), and the number of times that the vehicle has
been operated under the specific conditions for the monitor (XXXCOMP).
Statistics are also provided for the number of times the vehicle has been
operated in OBD monitoring conditions (OBDCOND), and the number of
times the vehicle's engine has been started (IGNCNTR).
1. With the Scan Tool in OBD2 mode, press M.
34
to return to the Vehicle
.
.
.
.