Matco Tools MD95 Operating Instructions Manual page 21

4. If more than one code was retrieved press DTC/FF to display
additional codes one at a time.
Whenever the Scroll function is used, the Scan Tool's
communication link with the vehicle's computer disconnects. To
re-establish communication, press POWER/LINK
5. When the last retrieved DTC has been displayed and DTC/FF is
pressed, the Scan Tool returns to the first code.
To exit the enhanced mode, Press System Menu
to the System Menu. Select Global OBD, then press ENTER
to return to the Global OBD2 mode.
To scan a selected module:
1. Choose Select Modules from the System Menu, then press ENTER
.
If the Select Group screen displays, select the group (Drive,
Chassis, Body, etc.) containing the module you wish to scan,
then press ENTER
If the Select Group screen does not display, proceed to step 2.
2. The Available Systems screen displays.
Select the desired module, then press
ENTER .
A "One moment please" message
displays while the requested DTCs
are retrieved.
3. Select the module for which you wish to
view DTCs, then press ENTER
"One moment please" message displays
while the requested DTCs are retrieved.
If the Scan Tool fails to link to the selected module, a
"Communication Error" message shows.
- Ensure your vehicle is OBD2 compliant.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press POWER/LINK
Menu
If the selected module does not
support the "Read DTC" function, an
advisory message displays. Press
System Menu
System Menu, or, press M to
access the Main Menu.
4. Refer to DISPLAY FUNCTIONS on
page 4 for a description of LCD display
elements.
. Proceed to step 2.
to return to the System Menu.
to return to the
Using the Scan Tool
NETWORK TEST
. A
to continue, or, press System
again.
to return
19