Adjustments And Settings - Matco Tools MD95 Operating Instructions Manual

5. Select the remaining digits in the DTC
in the same way. When you have
selected all the DTC digits, press
ENTER
6. When you have finished viewing the DTC
definition, select Back, then press ENTER
to return to the Enter DTC screen and
enter additional DTCs, or, press M to
return to the Main Menu.
If a definition for the DTC you
entered is not available, an advisory
message shows. Select Back, then
press ENTER
Enter
additional DTCs, or, press M button
to return to the Main Menu.
Viewing LED Definitions
The SYSTEM STATUS LEDs on the Scan Tool provide a visual
indication of the I/M Readiness status of the vehicle under test. The
LED Definitions function provides a description of the meanings of the
green, yellow and red SYSTEM STATUS LEDs.
1. From the Tool Library menu, select LED
Definitions, then press ENTER
The LED Definitions screen displays.
The screen provides a description of
the meanings of the green, yellow
and red SYSTEM STATUS LEDs.
2. When you have finished viewing the
LED meanings, press M to return to the
Main Menu.

ADJUSTMENTS AND SETTINGS

The Scan Tool lets you make several adjustments and settings to
configure the tool to your particular needs. The following functions can
be performed:
Adjust Brightness: Adjusts the brightness of the display screen.
Audible Tone: Turns the Scan Tool's audible tone "on" and "off."
When turned "on," a tone sounds each time a button is pressed.
Footer Messages: Turns the navigational "footers" at the bottom of
most display screens "on" and "off."
Hotkey Legend: Shows functional descriptions for the Scan Tool's
hotkeys.
to view the DTC definition.
to return to the
DTC screen and
Additional Tests
ADJUSTMENTS AND SETTINGS
enter
.
45