Matco Tools MD95 Operating Instructions Manual page 46

Additional Tests
THE TOOL LIBRARY
The screen shows the code "001,"
with the first "0" highlighted. Press
UP
necessary, to scroll to the first digit
of the DTC, then press DTC/FF.
The selected character displays solid,
and the next character is highlighted.
5. Select the remaining digits in the DTC
in the same way. When you have
selected all the DTC digits, press
ENTER
6. When you have finished viewing the
DTC definition, select Back, then press
ENTER
screen, or, press M to return to the Main
Menu.
If a definition for the DTC you entered is not available, an advisory
message shows. Select Back, then press ENTER
the Enter DTC screen and enter additional DTCs, or, press M to
return to the Main Menu.
Using the DTC Library (OBD2)
1. From the Tool Library menu, select
DTC Library, then press ENTER
The Select Library screen displays.
2. Select OBD2
ENTER
The Select Manufacturer screen
displays.
3. Select the desired vehicle manufacturer, then press ENTER
A confirmation message shows.
- If the correct manufacturer is not shown, select No, then press
ENTER
- If the correct manufacturer is shown, select Yes, then press
ENTER
4. The Enter DTC screen displays.
The screen shows the code "P0001," with the "P" highlighted.
Press UP
the desired DTC type (P=Powertrain, U=Network, B=Body,
C=Chassis), then press DTC/FF.
The selected character displays solid, and the next character is
highlighted.
44
or DOWN
to view the DTC definition.
to return to the Enter DTC
Library, then
.
to return to the list of vehicle manufacturers.
.
or DOWN
, as
.
press
buttons, as necessary, to scroll to
to return to
.