Matco Tools MD95 Operating Instructions Manual page 23

To erase enhanced, ABS, SRS or Network DTCs: Press
SYSTEM MENU
desired option, then press ENTER
Code Retrieval procedure and then proceed to step 3.
3. Press and release ERASE
If you are sure you want to proceed,
select Yes, then press ENTER
to continue.
If you do not want to proceed, select
No, then press ENTER
cancel the erase procedure.
4. If you chose to erase DTCs, a "One
moment please..." message displays
while the erase function is in progress.
If the vehicle's engine is running, an advisory message shows.
Turn the engine OFF, then turn the ignition back to ON. DO
NOT start the engine. Press ENTER
If the erase was successful, a
confirmation message shows. Press
SYSTEM MENU
System Menu.
If the erase was not successful
and ECU error code $22 is
present, an advisory message
displays. Start the engine and
maintain vehicle speed at 0, then
press ERASE
If the erase was not successful, an advisory message shows
indicating the erase request was sent to the vehicle's computer.
Press SYSTEM MENU
Using the Scan Tool
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
to display the System Menu. Select the
. A confirmation message shows.
button to
to return to the
to try again.
to return to the System Menu.
. Perform the appropriate
to continue.
21