Table of Contents
Advertisement
Additional Tests
VIEWING THE FIRMWARE VERSION - THE TOOL LIBRARY
5. Select the Monitor for which you wish to view Trip Cycle Procedures,
then press ENTER
A "One moment please..." message displays while the Scan
Tool retrieves the requested Trip Cycle Procedure. The Trip
Cycle Procedures screen for the Monitor displays when the
procedure has been retrieved.
If a Trip Cycle Procedure for the selected Monitor is not
available, an advisory message shows. Select Back, then
press ENTER
6. The Trip Cycle Procedure screen shows
the specific set of operating procedures
that ensure the vehicle is driven in such
a way that all the required "Enabling
Criteria" for the Monitor to run and
complete its diagnostic testing are met.
7. When you are finished viewing the Trip
Cycle Procedures, press ENTER
return to the Trip Cycle Procedures menu,
or, press M to return to the Main Menu.
VIEWING THE FIRMWARE VERSION
1. Select Firmware Version in the Main
Menu, then press ENTER
The
displays.
The screen shows the Scan Tool's
current firmware version, bootloader
version and database version.
2. Press M to return to the Main Menu.
THE TOOL LIBRARY
The
Tool
reference information for the Scan Tool.
The following functions are available:
Tool Icons – Shows the full names for
the I/M MONITOR STATUS icons
shown and descriptions of informational
icons on the Scan Tool's display.
DTC Library – Provides access to libraries of OBD1 and OBD2
DTC definitions.
LED Definitions – Provides descriptions of the meaning of the Scan
Tool SYSTEM STATUS LEDs.
42
.
to return to the Main Menu.
Firmware
Version
Library
contains
to
.
screen
valuable
Hide quick links:
Advertisement
Table of Contents
