Battery/Alternator Monitor - Matco Tools MD95 Operating Instructions Manual

Additional Tests

BATTERY/ALTERNATOR MONITOR

If the battery reset process is not successful, a "Reset Fail"
message displays. Press M to return to the Main Menu.
To perform battery reset OBD service (Audi/Volkswagen):
1. While linked to a vehicle, press M.
The Main Menu displays.
2. Select Battery Reset, then press ENTER
The Battery Reset menu displays.
3. Select Battery Reset OBD Service, then press ENTER
An "informational" screen displays.
4. Select Next, then press ENTER
A series of "instructional" screens display, directing you to enter
reference information for the battery (part number, manufacturer,
serial number).
5. Select Next as necessary, and press ENTER
screen and enter the necessary information.
A "confirmation" screen displays.
The screen shows the previously
entered
Battery manufacturer and Battery
serial number.
6. Select the desired option:
To proceed with coding, select
Carry
ENTER
To re-enter battery reference information, select Repeat input
and press ENTER
To cancel the battery reset process,
select Cancel and press ENTER
to return to the Main Menu.
7. If battery coding was successful, a
"confirmation" screen displays. Press M
to return to the Main Menu.
If battery coding was not successful,
an "advisory" screen displays. Press
M to return to the Main Menu.
BATTERY/ALTERNATOR MONITOR
The Scan Tool can perform a check of the vehicle's battery and
alternator system to ensure the system is operating within acceptable
limits. You can perform a battery check only, or an alternator system
(battery and alternator) check.
38
Battery part
out coding and
. Proceed to step 7.
. Repeat steps 4 an 5.
.
to continue.
number,
press
.
to scroll the