Using Sensorsafe - CYBEX Sirona M Owner's Manual

GENERAL INFORMATION ABOUT SENSORSAFE
This device complies with RSS-247 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference. This Class B
digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la
Classe B conforme à la norme NMB-003 du Canada).
Chest Clip:
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Dongle:
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
63
TM
1. INSTALL THE SENSORSAFE RECEIVER.
Locate the 16PIN OBDII port
manual for location. Plug in the SensorSafe Receiver.
2. POWER UP THE VEHICLE.

USING SENSORSAFE

in your vehicle. Refer to your vehicle owner's
a
If unable to locate your vehicle manual, the
SensorSafe Application may contain information
regarding the location of the 16PIN OBDII port for
your vehicle
Your SensorSafe Receiver will sound one prolonged
a
tone when it first communicates with the vehicle
network. In some vehicles this occurs immediately
after installing the SensorSafe Receiver, in other
vehicles the tone will not be heard until the vehicle
has been started.
This initialization signal only occurs one time after
installation.
64