Download Print this page

Wi-Fi Troubleshooting - SkyStream TWO User Manual

Hide thumbs


Enter the correct name for your wireless network
Selecting the wrong wireless network name will cause your wireless
network connection to fail. If you are not certain that your
SkyStream device is connected to the correct network Read Below.
When connecting your SkyStream device to your home wireless
network, you will need to select the name of the wireless network.
The SkyStream device scans all available networks and presents a list
that is ordered by the strength of the wireless signal.
The wireless network name, sometimes called the SSID, is either the
default name that was set by your ISP or router manufacturer, or the
name you chose when you set up your wireless network.
How to find your wireless network name
Check to see which network your computer or mobile device is
connected to. The SkyStream device will connect to the same
If you cannot remember the name of your wireless network, go
to the support sites for your internet service provider or router
manufacturer. Also, sometimes the default name is listed on
the bottom of the router.
Enter the same wireless password that you use to connect your
computer or mobile device to your home network.
Wi-Fi Trouble Shooting Guide
How to get your wireless password

Hide quick links: